Filter6 Results
BREMONT
Hawking Limited Edition Automatic 41mm Stainless Steel and Leather Watch
£7,063
SEASONAL
BREMONT
Hawking Limited Edition Automatic 41mm 18-Karat White Gold and Leather Watch
£16,779
SEASONAL
BREMONT
Broadsword Automatic 40mm Stainless Steel and Sailcloth Watch, Ref. BROADSWORD-R-S
£2,297
BREMONT
ALT1-C/CR Automatic Chronograph 43mm Stainless Steel and Leather Watch, Ref. No. ALT1-C/CR
£4,236
SEASONAL
BREMONT
ALT1-ZT/51 Automatic GMT Chronograph 43mm Stainless Steel and Leather Watch, Ref. ALT1-ZT-BK-R-S
£4,148
SEASONAL
BREMONT
U-2/51-JET Automatic 43mm Stainless Steel and Leather Watch, Ref. U2-51-R-S
£3,618
SEASONAL
768x4332-aftercare

A Piece Of History

Of all Bremont’s annual limited editions, the highest profile is arguably 2014’s “Wright Flyer”, which goes back to the very roots of powered flight. Each of the 450 watches’ winding rotors contained a tiny piece of unbleached muslin, spliced from the very fabric that coated the delicate wooden spaceframe of the Wright Brothers’ airplane – the very one that proved manned, heavier-than-air flight was possible.

768x4332-aftercare

Ready To Serve

The Bremont Military division’s first collaboration was with a squadron of high-altitude U-2 spy plane pilots at Beale, California. One of their members had seen Mr Bear Grylls wearing a Bremont wacth on Man Vs Wild and contacted the brand. Sure enough, along came a strictly exclusive version of Bremont’s shockproof MBII watch incorporating the U-2 nomenclature, camera-sighting motif, aircraft and tail markings. Military sorts being tribal, competitive sorts, the floodgates were opened once word got out…

INNOVATIONS

The Trip Tick Case

Bremont’s proprietary, tripartite “Trip-Tick” case construct is machined in-house and surface-treated in the same way as jet turbine blades to gain a hardness of 2,000 Vickers, seven times harder than competitors’. It’s virtually scratchproof.

The Shockproof Mount

Initially designed by Bremont for the MB range of watches, this unique watch's rubberised movement mount encloses the inner workings. A flexible ring then connects the mount to the outer case, absorbing shocks and allowing the inner case and movement to “float”.

Roto-Click

“Roto-Click” is a new interior rotating bezel conceit, designed and built in-house by Bremont. The circumferential, calibrated bezel ring glides on a series of four ball bearings, which knit into the gearing to produce a most satisfying “click” for every minute notch.

Page 1 of 1